Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question about voice-port and translation-profile configured on it. ISDNPRI

I have voice gateways that works like MGCP.

I also configured them for SRST and voice-ports configured with voice tranlation profiles that will work as H323 gatway in fallback mode.

Sometimes configuration of translation-profiles disappear from voice-port.

the problem is that when I have secondary problem with voice gateway (translation-profiles were been disappeared from voice-port.) and I hadn't configured translation-profiles, voice gateway will not be work.

So the problem is that I should control all voice-ports in all gateways to have command translation-profile.

How I can automate this, i think,issue?

Thank you

  • IP Telephony
1 REPLY
Cisco Employee

Re: Question about voice-port and translation-profile configured

You probably have this commands:

ccm-manager config server x.x.x.x

ccm-manager config

remove them

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
185
Views
0
Helpful
1
Replies