Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

"debug voip ccapi inout" interpreter

Hi,

does anybody know any "debug voip ccapi inout" output interpreter, which would display call setup-process-disconnect based on call ID?

Quick orientation in the debug output is a problem, especially in case of many simultaneous calls.

Thank you,

Lubomir

  • IP Telephony
Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Silver

Re: "debug voip ccapi inout" interpreter

Hi Lubomir

Try Tripple Combo at http://www.employees.org/~tiryaki/tc/

This is very helpful tool.

Thank you

abu

Cisco Employee

Re: "debug voip ccapi inout" interpreter

I don't know of one for CCAPI, but it's actually fairly straightforward to follow the call in notepad.  Take a look at this document, which does a good job to explain how to trace a call through via CCAPI:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/voice_troubleshooting/old/vts_dbg.html

4 REPLIES
Silver

Re: "debug voip ccapi inout" interpreter

Hi Lubomir

Try Tripple Combo at http://www.employees.org/~tiryaki/tc/

This is very helpful tool.

Thank you

abu

Cisco Employee

Re: "debug voip ccapi inout" interpreter

I don't know of one for CCAPI, but it's actually fairly straightforward to follow the call in notepad.  Take a look at this document, which does a good job to explain how to trace a call through via CCAPI:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/voice_troubleshooting/old/vts_dbg.html

New Member

Re: "debug voip ccapi inout" interpreter

Abu, Steven,

thank you both for the helpful posts!

Lubomir

Cisco Employee

Re: "debug voip ccapi inout" interpreter

Hi Lubomir,

While I realize this question is actually answered, I wanted to show you a post I just answered where I covered briefly how to track a call in ccapi.

Maybe it can be useful for you one day:

https://supportforums.cisco.com/thread/2047807?tstart=0

Once you got the hang of it, please share your knowledge with your team members and peers. It's so much more fun if we receive a new TAC case where partner or customer have already done nice troubleshooting!

Cheers,

Cedric

14678
Views
0
Helpful
4
Replies
This widget could not be displayed.