Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

"Please wait while I transfer your call" with Unity Connection 1.21

Is there any way to supress this message when a call is being transferred by Unity Connection?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: "Please wait while I transfer your call" with Unity Connecti

Hi Brian,

To delete the "Please wait while we transfer your call" message;

For Unity versions prior to 4.1 (and UC 1.x) here is an excellent answer from Jeff @ Cisco;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd9a0d8/0#selected_message

The nice thing is that this is much easier to change in the new UC 7.X Version;

The ability to change "Record Your Message at the Tone" prompt is not available until UC 7.0;

User Templates Edit Greeting

Play the "Record Your Message at the Tone" Prompt

Check this check box to have Cisco Unity Connection prompt callers to wait for a tone before recording their message.

Default setting: Check box checked.

From this good doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg030.html#wp1141185

Or per user;

Edit Greeting

Play the "Record Your Message at the Tone" Prompt

Check this check box to have Cisco Unity Connection prompt callers to wait for a tone before recording their message.

Default setting: Check box checked.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg010.html#wp1064962

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: "Please wait while I transfer your call" with Unity Connecti

Hi Brian,

To delete the "Please wait while we transfer your call" message;

For Unity versions prior to 4.1 (and UC 1.x) here is an excellent answer from Jeff @ Cisco;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd9a0d8/0#selected_message

The nice thing is that this is much easier to change in the new UC 7.X Version;

The ability to change "Record Your Message at the Tone" prompt is not available until UC 7.0;

User Templates Edit Greeting

Play the "Record Your Message at the Tone" Prompt

Check this check box to have Cisco Unity Connection prompt callers to wait for a tone before recording their message.

Default setting: Check box checked.

From this good doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg030.html#wp1141185

Or per user;

Edit Greeting

Play the "Record Your Message at the Tone" Prompt

Check this check box to have Cisco Unity Connection prompt callers to wait for a tone before recording their message.

Default setting: Check box checked.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg010.html#wp1064962

Hope this helps!

Rob

1301
Views
0
Helpful
1
Replies
CreatePlease login to create content