Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

"voicemail callerid" command not recognized

Cisco Unity Express Version 3.1

OS: C2800NM

IOS Software: C2800NM-SPSERVICESK9-M

Software: 12.4(15)T1 / CME 4.1(0)

Trying to enable external voicemail caller ID.

"Play caller ID for external callers" is already set to Yes. When I tried to enter the command "voicemail callerid" into the global configuration, I get an invalid input. My current email voicemail notification 'from' line are coming as "undefined". Am I missing something or do I need to upgrade my IOS?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: "voicemail callerid" command not recognized

Are you using the command line for CUE. The commands would be something similar to(depending on your CUE module/slot):

router#service-module service-engine 0/0 session

cue>enable

cue#conf t

cue(config)#voicemail callerid

Hope this helps.

Brandon

1 REPLY

Re: "voicemail callerid" command not recognized

Are you using the command line for CUE. The commands would be something similar to(depending on your CUE module/slot):

router#service-module service-engine 0/0 session

cue>enable

cue#conf t

cue(config)#voicemail callerid

Hope this helps.

Brandon

612
Views
0
Helpful
1
Replies
CreatePlease to create content