Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Rebooting or Shutting CUCM verison 6.0x

team

how do i soft reboot or soft restart the CUCM and Unity express manager without having to go to the back and pulling the cable out and using the power on and off switch etc ..

please advise

thank you

5 REPLIES
Cisco Employee

Re: Rebooting or Shutting CUCM verison 6.0x

System Restart

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch5.html

On CUE just type reload.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Rebooting or Shutting CUCM verison 6.0x

thank you , looks simple , will try this once in the office and i will update you.

New Member

Re: Rebooting or Shutting CUCM verison 6.0x

this is great tips , thank you

New Member

Re: Rebooting or Shutting CUCM verison 6.0x

Another quick question please ..

once shutting down the CM softly , i see the cm does shut down completely as the lights on front of the CM is still blinking , i dont have a monitor attached , but how do i know its shut down ? and how long does normally take to fully shut down ?

i see on the cisco documentation it says " the hardware does not power down automatically"

please advise , thank you

Re: Rebooting or Shutting CUCM verison 6.0x

Yes you have to manually power off the hardware. You can use ping test or if you have monitor connected, it will display you that system is shutdown.

HTH

199
Views
0
Helpful
5
Replies