I need to estimate the coverage of a system using the AP1231G and some cisco ip 7920 phones, but i just can't find the receiver sensitivities for the 7920 phone for each of the available data rates: could anyone help me?
Most 802.11 radios have a receiver sensitivity value of -94 dBm to -85 dBm at a data rate of 1 Mbps (the lower the dBm value, the better the radio's receiver sensitivity). Radio receiver sensitivity changes with data rates; for example, an access point radio might have a receiver sensitivity of -94 dBm at 1 Mbps, but the radio sensitivity might be -84 dBm at 11 Mbps."
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4