Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Reg: Any test command available on the router

Hi,

We have got several offices in different countries. I am able to find out the calling number if the call is forwarded from the H323 router in the branch office to the local PSTN by using debug ISDN Q931 command. My question is is there any test command that I can use to place a call from the router to the local PSTN. Right now there is no one in one of our new branch office to place a call to the local PSTN and as such I am unable to find out the outgoing number. Ofcourse I can look at the translation rule but I just want to make sure what the outgoing number is.

5 REPLIES
Community Member

Re: Reg: Any test command available on the router

Hi there,

you can try the:

"isdn test call interface BRIK/L XXXXXXXXXX"

Hope that helps.

Cheers.

Silver

Re: Reg: Any test command available on the router

I've used "csim start " but I'm not sure how long that call stays up.

Lelio

Community Member

Re: Reg: Any test command available on the router

"csim start" requires that you have already configured the appropriate dial-peer. What I suggested doesn't. Plus you test your ISDN card and/or line.

Community Member

Re: Reg: Any test command available on the router

Hi Guys,

Thanks for your replies. I tried both of them but not able to place a call sucessfully. Any other suggestions ?

Rgds

Silver

Re: Reg: Any test command available on the router

Thanks for clearing that up.

126
Views
0
Helpful
5
Replies
CreatePlease to create content