Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Register Cisco IP Communicator as SIP into Call manager express

Dear All,

How can I register Cisco IP Communicator as a sip phone into call manager express?

I cannot change Protocol from SCCP to SIP in CIPC??

Hamed

1 ACCEPTED SOLUTION

Accepted Solutions

Register Cisco IP Communicator as SIP into Call manager express

Technically, Cisco doesn't support CIPC running SIP with CME. This is true up to the current release (from 8.6 release notes):

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/8_5/english/release_notes/CIPC8x_RN.html#wp128657

Supported Cisco Unified Communications Manager Express Releases

Cisco IP Communicator Release 8.6 supports the following:

Cisco Unified Communications Manager Express version 7.1 (nonsecured SCCP only)

I have heard that people have been able to get CIPC to register with CME as phone type 7970. This makes some sense given that when CIPC was first developed it was more or less built based on 7970 firmware. Though, I have not tested this behavior myself on CME.

HTH.

Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

2 REPLIES

Register Cisco IP Communicator as SIP into Call manager express

Technically, Cisco doesn't support CIPC running SIP with CME. This is true up to the current release (from 8.6 release notes):

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/8_5/english/release_notes/CIPC8x_RN.html#wp128657

Supported Cisco Unified Communications Manager Express Releases

Cisco IP Communicator Release 8.6 supports the following:

Cisco Unified Communications Manager Express version 7.1 (nonsecured SCCP only)

I have heard that people have been able to get CIPC to register with CME as phone type 7970. This makes some sense given that when CIPC was first developed it was more or less built based on 7970 firmware. Though, I have not tested this behavior myself on CME.

HTH.

Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

New Member

Register Cisco IP Communicator as SIP into Call manager express

Thank you William ,

You are a champ...

I will try adding it by using 7970  and hope it works!!

Hamed

1071
Views
5
Helpful
2
Replies
CreatePlease login to create content