Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Register phones into voice Gateway

Want to know do we need to register the phone(Directory Number)into voice Gateway? How do we register? is it by Directory Number range? And also lets assume i have set of Number registered in the Voice Gateway and lateron i added some additional phones into CCM and how this additional phones are registered with Voice Gateway? Thanks if somebody can explain.

1 REPLY

Re: Register phones into voice Gateway

Hi,

If you are talking about analog devices connected to FXS ports in the voice gateway, you can define DNs and control those devices with the CM via MGCP.

If you don't want MGCP, you can define DNs and control analog devices with H.323 in the voice gateway.

In this case you define the DNs with dial peer configurations.

Reference links:

Dial Peer Configuration on Voice Gateway Routers:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dpeer_c.html

Info about MGCP:

http://www.cisco.com/en/US/tech/tk652/tk701/tk419/tsd_technology_support_sub-protocol_home.html

Info about H.323:

http://www.cisco.com/en/US/tech/tk652/tk701/tk309/tsd_technology_support_sub-protocol_home.html

Hope it helps, if it does please rate.

Best regards.

101
Views
0
Helpful
1
Replies
CreatePlease login to create content