I have two servers 4.1(3)sr3c, working in cluster,I install the executable: cmterm-7921-sccp.1-3-2.exe, as said the link http://www.cisco.com/web/software/2820742 89/23577/cmterm-7921-sccp.1-3-2- Readme.html.
I Place the file in the directory tftp, and when i executed the software, appear the following files:
WLAN-1.3.2.SBN 1,320 kb
TNUXR-1.3.2.SBN 2,153 kb
TNUX-1.3.2.SBN 876 kb
SYS-1.3.2.SBN 2,035 kb
GUI-1.3.2.SBN 1,796 kb
CP7921G-1.3.2.LOADS 1 kb
APPS-1.3.2.SBN 2,602 kb
When i looking at Device Settings > Device Defaults, the firmware of phone 7921, does not appear in load Information.
I run the file in the main server, i have not done in the secondary server.
Is normal the size of the file CP7921G- 1.3.2.LOADS?
Do I have to install the software in the two servers, for that the phone 7921 appear in device defaults?
Should i restart the service cisco tftp server, in the tow servers, for that the phone 7921 appear in device defaults?
Should i restart the servers , for that the phone 7921 appear in device defaults?
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...