Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Registration status in CCM 3.3(5)

I have the following problem in a 3 CCM 3.3(5) cluster consisting of 1 publisher/subscriber and 2 subscribers, using 2 different callmanager groups.

Most telephones are registered in Callmanager but if telephones are added to the second callmanager group, they work but have a not registered status in the CCM Administration.

Someboy of you is familiar with this problem and even better is there a solution.

See also the attachment.

TIA

Regards

Aad

2 REPLIES
Hall of Fame Super Red

Re: Registration status in CCM 3.3(5)

Hi Aad,

Look for the differences in the 2 CCM Groups. Are all 3 servers (1 Pub and 2 Subs) in both groups? Is there a problem with the DB sync between the first CCM in the non-working group and the Pub?

Let us know.

Rob

New Member

Re: Registration status in CCM 3.3(5)

Hi Rob,

Yes in both groups same servers, only the order different. The problem is only related to one specific server. For your information

Grp 1: server 1, server 2, server 3

Grp 2: server 2, server 3, server 1

Grp 3: server 3, server 2, server 1 (problem)

Grp 4: server 3, server 1, server 2 (problem)

the problem is again the registration status, the telephones themselves work fine. In the network config screen on the telephone itself or via the web interface it says: server 3 active, server 2 standby, server1 or server 3 active, server 1 standby, server 2 (depends on grp 3 or 4 chosen).

By the way how do I check the DB sync?

Rgrds

Aad

89
Views
0
Helpful
2
Replies