I've been searching licensing documents but couldn't find this mentioned, apologies if I've missed it in an obvious document!
Hypothetically though, if I had CUCM Cluster A and CUCM Cluster B and Cluster A had a surplus of DLUs and Cluster B was running low/in overdraft - is it possible to remove a license file from Cluster A that contains a bunch of DLUs and ask Cisco Licensing to re-host that license to CUCM Cluster B - or would they only do for regular causes of a License MAC change (NTP, domain name, etc)?
CUCM licenses are not transferable between clusters until version 9 where you can use common ELM to track them. With DLU licenses you can email email@example.com with the request, but they may not be able to assist.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...