Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reject call at H.323 GW

I am trying to reject a call at our H.323 GW. I thought I had this correct but the call is still coming through.

voice translation-rule 1

rule 1 reject /8041234567/


voice translation-rule 2099

rule 1 /^2990/ /2099/

rule 2 /^2033/ /2040/


voice translation-profile LD_Trans_1

translate calling 1

translate called 2099


voice-port 0/2/0:23

translation-profile incoming LD_Trans_1

I am trying to reject Translation-Rule 1. I did a Debug Translation Detail and it does not show the call being rejected.

What am I doing wrong?

Thanks in advance



Re: Reject call at H.323 GW

What does it show when you test the translation rule by using

test voice translation-rule

New Member

Re: Reject call at H.323 GW

It shows blocked.

Re: Reject call at H.323 GW

Can you post your dial-peer for incoming calls? I guess you have to apply translation-rule in there as well.

PS: If you are in production i would suggest you try after-hours.

New Member

Re: Reject call at H.323 GW

Thanks for your help. Here is the dial peer. Translation rule 2099 does work as is, so I would think just adding a new translation rule to the translation profile should work.

dial-peer voice 2099 voip

preference 1

destination-pattern 2099

progress_ind setup enable 3

voice-class codec 1

voice-class h323 1

session target ipv4:X.X.X.X

dtmf-relay h245-alphanumeric

no vad

Hall of Fame Super Gold

Re: Reject call at H.323 GW

Hi, can you check with "debug isdn q931" that the calling number is indeed what you're trying to reject ?