Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Related to call Forward to Number in Particular time from call manager

Hi,

We have one requirement to forward the call to Number in particular time.So, i just wanted to know can we have an option available in call manager to forward the call in particular time.

Its urgent,need your help.Plz

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Related to call Forward to Number in Particular time from call m

You can accomplish this with Time Periods/Schedules. The general concept is that CUCM will activate a Partition - and the translation patterns it contains - in accordance with the time schedule you specify. In your situation you could add a partition with a translation pattern that forwards calls to that destination elsewhere. The time schedule attached to the partition will only make that translation pattern available in the CSS within the specified periods. When the partition is inactivated per the schedule the call will ring through to the normal directory number. Just be sure to use Urgent Priority on the translation pattern or place the Partition above your normal DN's partition.

Time of Day Routing:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03tod.html#wpxref46259

Please rate helpful replies.

Please remember to rate helpful responses and identify helpful or
3 REPLIES
VIP Super Bronze

Related to call Forward to Number in Particular time from call m

You can accomplish this with Time Periods/Schedules. The general concept is that CUCM will activate a Partition - and the translation patterns it contains - in accordance with the time schedule you specify. In your situation you could add a partition with a translation pattern that forwards calls to that destination elsewhere. The time schedule attached to the partition will only make that translation pattern available in the CSS within the specified periods. When the partition is inactivated per the schedule the call will ring through to the normal directory number. Just be sure to use Urgent Priority on the translation pattern or place the Partition above your normal DN's partition.

Time of Day Routing:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03tod.html#wpxref46259

Please rate helpful replies.

Please remember to rate helpful responses and identify helpful or
Green

Related to call Forward to Number in Particular time from call m

Hi,

You will need to look at Time Day Routing

I do not know which version of CUCM you are running.

Here is a link for ver 7.1.3

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b03tipd.html

You will need a T.O.D partition

A TOD css etc

HTH

Alex

Regards, Alex. Please rate useful posts.
New Member

Related to call Forward to Number in Particular time from call m

Thanks for this information,can we have another option from  Remote destination in call manager?

198
Views
0
Helpful
3
Replies