Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Remote Reset of Phone

CM 6.1 using extention mobility - but when you come to reset the phone device to which the user is logged in error "no associated devices to restart"

Find user - highlight device - reset, to no avail

You can reset the device on the phone itself

Any ideas? thanks in advance

3 REPLIES
Hall of Fame Super Red

Re: Remote Reset of Phone

Hi Nick,

Try searching for the Device via Device >Phone >Device Name >Contains > enter the phone Mac or maybe even Description >Contains

Once you find the specific phone you can do a Reset :)

Hope this helps!

Rob

New Member

Re: Remote Reset of Phone

Hi Rob, many thanks for the reply.

What if the MAC was unknown as it is remote? but can only find it on the user name?

Would have thought by finding the user and resetting the device from the user - unless what you said is the only way

Looking forward to your reply - thanks again

Hall of Fame Super Red

Re: Remote Reset of Phone

Hi Nick,

The problem is that the User does not have "ownership" of any specific device as shown by this return;

"no associated devices to restart"

You will need to find another method to identify the Device itself so you can Reset via the Device>Phone page in CCM. There must be a Description entered against this Device that you could search on? You should be able to narrow this down.

Rob

207
Views
0
Helpful
3
Replies
CreatePlease to create content