Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Remote Server Details is required

I'm attempting to do a couple of firmware upgrades to a couple of 7940 (cmterm-7940-7960-sccp.8-0-10.cop.sgn) and 7941(cmterm-7941_7961-sccp.8-4-3.cop.sgn) phones. CM7.0(1) system. The software has been placed on a SFTP server. Going into Software Installation/upgrade, using Remote Filesystem as the Source, I'm getting a status back of "Remote Server Details is required". Any idea what it doesn't like?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Remote Server Details is required

Here's an example of what it should look like. You may also want to try just plain FTP if the certificate is not trusted by the UCM node.

Directory: /

Server: 10.1.1.10

Username: jdoe

Password: password

Transfer Protocol: SFTP | FTP

3 REPLIES
VIP Super Bronze

Re: Remote Server Details is required

Here's an example of what it should look like. You may also want to try just plain FTP if the certificate is not trusted by the UCM node.

Directory: /

Server: 10.1.1.10

Username: jdoe

Password: password

Transfer Protocol: SFTP | FTP

New Member

Re: Remote Server Details is required

We've tried both SFTP and FTP. Username and Password were reentered at least 5 times. Directories were adjusted and we still get the same message -

New Member

Re: Remote Server Details is required

We found the problem. We had a password with a space in it. Removed the space, the remote file location is found and accepted.

447
Views
0
Helpful
3
Replies
CreatePlease to create content