Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

remote sip phone registers to cme but out going call fails

   Calling from the remote 9971 fails but incomming call works fine. Any help would be appreciated.

Thanks!

5 REPLIES
Hall of Fame Super Silver

Re: remote sip phone registers to cme but out going call fails

Do you have proper dial peers and cor?
Can you post your config?

Sent from Cisco Technical Support iPhone App

New Member

remote sip phone registers to cme but out going call fails

Chris I addedd the configs as an attachment

remote sip phone registers to cme but out going call fails

Hi.

From your config, I can see only hub router with register pools and nothing else regarding voice.

Where calls come from?

Do you have another voice router in infrastructure?

Please let us know.

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

remote sip phone registers to cme but out going call fails

Thanks for responding,

there are two configs, one from the hub router and one from the remote site. The two are connected over a WAN circuit.

The hub config contains all of the relevant voice info along with tftp files. The remote site config shows the physical and logical port information there are two voice ports 0/1/6 and 0/1/7.

Regards.

Re: remote sip phone registers to cme but out going call fails

Hi
Ok now I figure out what you have.
Can you please post the output of a show register pool registered and debug ccsip messages during a failing call?

Thanks

Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
264
Views
0
Helpful
5
Replies
CreatePlease to create content