Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Remote sites T1's Down - Failover Backup options - Please advise

Our remote sites each have two backup pstn phone lines connected to a VIC-4FXO interface card on a 2801 router. How do I route all phone calls to those lines while their T1's are down? We are running CUCM 7

Help would be greatly appreciated.

2 REPLIES
New Member

Remote sites T1's Down - Failover Backup options - Please advise

Are the T1s and FXOs on the same gateway?

Is the gateway mgcp or h323?

If it's mgcp, configure the FXOs and add those to the route group for outbound calls,

If it's h323, create new dial peers for outbound calls pointing to the FXOs with a higher preference than the T1 dial peer.

This is assuming that by T1 you mean T1 PRI.

Re: Remote sites T1's Down - Failover Backup options - Please ad

Yes, the T1's and the FXO are on the same gateway.

The gateway is mgcp

Please check my configuration, I've attached a few screenshots. The hunt pilot for that site is 2300, that number rings all their phones.

Yes, T1 PRI.

Thank you very much.

572
Views
0
Helpful
2
Replies