Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

remotely enable IP phone web interface

Does anybody know if it is possible to remotely enable an IP phone web interface using for example an ephone- template or similar? ( I have looked at the ephone-template settings but it does not seem possible) any ideas?

Thanks

Sent from Cisco Technical Support iPad App

6 REPLIES
Hall of Fame Super Gold

remotely enable IP phone web interface

Which phone model are you talking about? What issue are you trying to solve with having web interface on the phone (that BTW is enabled by default) ?

New Member

Re: remotely enable IP phone web interface

It's a 9951 on CME 9.0

On these phones the web interface is disabled by default.

I have a requirement to use a phone remote control tool in a remote office.

Thanks

Sean

Hall of Fame Super Gold

remotely enable IP phone web interface

I don't know about the web interface on the 9951, but generally to remote control a phone you use TAPI, or XML, there are applications that do that.

New Member

Re: remotely enable IP phone web interface

So, to do this for SCCP phones enter the following under telephony-service

Service phone webAccess 0

I do not yet know if there is an equivalent for SIP phones under voice reg global

Hall of Fame Super Gold

Re: remotely enable IP phone web interface

See if you can host the xml files on an  external tftp server, so you can edit them as desired.

New Member

Re: remotely enable IP phone web interface

I have this same question... Running a SIP only CME 9.0 with 7942/62's and I want to be able to browse call stats and such via http much like you can do with SCCP phones... is this possible? Is there an equivelent voice registar global command to "service phone webAccess X"?

Thanks!

456
Views
0
Helpful
6
Replies