Cisco Support Community
Community Member

Remotely reboot 7941 with SIP firmware?

Does anyone know how to remotely reboot a Cisco 7941 with SIP firmware?

On the 7940 it was possible to reset via telnet, but this option does not exist via ssh on the 7941.

I also tried sending a check-sync event via SIP NOTIFY (seen at, so not documentation for 7941, but older phone). I'm sending:

NOTIFY sip:hp_2@;transport=udp SIP/2.0

Via: SIP/2.0/UDP;branch=z9hG4bK06fa5bd6;rport

From: "amathor" <sip:amathor@>;tag=as1278efea

To: <sip:hp_2@;transport=udp>

Contact: <sip:amathor@>

Call-ID: 18c6e2416c4fc6ca6ca5754954c6e962@

CSeq: 102 NOTIFY

User-Agent: Amathor PBX

Max-Forwards: 70

Event: check-sync

Content-Length: 0

The phone logs:

DBG 16:31:54.311331 JVM: SIPTaskProcessSIPMessage: Received SIP message NOTIFY.

DBG 16:31:54.312884 JVM: SIPTaskProcessSIPNotify: NOTIFY: check-sync

DBG 16:31:54.313763 JVM: sipSPISendErrorResponse: Sending response 200...

DBG 16:31:54.315930 JVM: sipRelDevCoupledMessageStore: Storing for reTx (cseq=102,

method=NOTIFY, to_tag=<>)

DBG 16:31:54.317631 JVM: sipTransportSendMessage: Opened a one-time UDP send channel to

server <>:<5060>, handl

ocal port= 0

DBG 16:31:54.318993 JVM: sipTransportSendMessage:Sent SIP message to

<>:<5060>, handle=<29>, length=<338>, mess

DBG 16:31:54.319878 JVM: SIP/2.0 200 OK

Via: SIP/2.0/UDP;branch=z9hG4bK06fa5bd6;rport;received=

From: "amathor" <sip:amathor@>;tag=as1278efea

To: <sip:hp_2@;transport=udp>

Call-ID: 18c6e2416c4fc6ca6ca5754954c6e962@

Date: Tue, 15 Jan 2008 15:31:54 GMT

CSeq: 102 NOTIFY

Content-Length: 0

DBG 16:31:54.321373 JVM: sipTransportSendMessage: Closed a one-time UDP send channel

handle = 29

DBG 16:31:56.400547 JVM: SIPTaskProcessListEvent: cmd = 0x0

DBG 16:31:56.401718 JVM: SIPTaskProcessListEvent: cmd = 0x67

So it seems like it understands the message, but it does not request any files via tftp and it does not reset.

Anyone knows how it can be done?


CreatePlease to create content