CUCM 7 already provides an EM service parameter for that
Clear Call Log:
This parameter determines whether the call information stored on the phone directory (missed calls, placed calls, received calls) is cleared when a user manually logs in or out of a phone. Valid values specify True (the phone deletes the call information) or False (the phone does not delete the call information and subsequent phone users can review the missed, placed, and received call information).
What if EM isn't deployed in your environment? I had a user ask me if they could have the logs removed altogether from their individual phone due to the confidential calls that they have to make. I showed them how to manually clear them. I don't recall where you could do that for say just 1 phone, am I wrong (we have CUCM6.1.2)?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...