Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

remove digits from incoming DID number

How translation rule can i use to remove 6 digits of DID number received from ITSP and pass on 4 digits to the PABX (integrated with ISDN pri ) on cisco voice gateway. 

The incoming dial peer is voip dial peer because call is coming from ITSP using SIP.

For eg DID number range is 0419137101 - 0419137599

2 REPLIES
Community Member

  Check the dial-peer forward

 

 

Check the dial-peer forward-digits configuration and if you are using SIP trunk check the inbound call routing significant digits. 
 
 
Community Member

If I follow, I believe you

If I follow, I believe you could use something like this:

 

voice translation-rule 1

  rule 1 /.+\(....\)/ /\1/

 

voice translation-profile strip6

 translate called 1

 

dial-peer voice 1 voip ! Inbound SIP dialpeer

  translation-profile incoming strip6

  ......

  ......

 

62
Views
5
Helpful
2
Replies
CreatePlease to create content