The Cisco Unified Communications Manager Administration Guide does not provide the error messages that display when you attempt to delete a server. For information on these error messages, see the "Deleting Then Adding Back a Server in Cisco Unified Communications Manager Administration" section.
Disregard the entire section, "Deleting a Server," in the System-Level Configuration Settings chapter in the Cisco Unified Communications Manager System Guide. Instead, consider the following information when you delete a server:
â¢Cisco Unified Communications Manager Administration does not allow you to delete the first node in the cluster, but you can delete any subsequent node. When you attempt to delete a node, Cisco Unified Communications Manager Administration displays the message that is described in the "Deleting Then Adding Back a Server in Cisco Unified Communications Manager Administration" section.
â¢Cisco recommends that you do not delete any node that has Cisco Unified Communications Manager running on it, especially if the node has devices, such as phones, registered with it.
â¢Although dependency records exist for the subsequent nodes, the records do not prevent you from deleting the node.
â¢If any call park numbers are configured for Cisco Unified Communications Manager on the node that is being deleted, the deletion fails. Before you can delete the node, you must delete the call park numbers in Cisco Unified Communications Manager Administration.
â¢The system may automatically delete some devices, such as MOH servers, when you delete a server.
â¢Before you delete a node, Cisco recommends that you deactivate the services that are active on the subsequent node. Performing this task ensures that the services work after you delete the node.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4