Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Removing DID digits in SRST Mode

I'm getting 8 digits from the Telco and we use 7, I'm having a hard time finding out how to remove the first digit.

Example - incoming DID number 47111309 extension number 7111309

Thanks for the help

Everyone's tags (3)
5 REPLIES
Silver

Re: Removing DID digits in SRST Mode

Hi,

Use a voice translation-rule/profile and applyy it to an inbound dial-peer that is catching the DID or directly to the port (although this will trim it to 7 digits even when you are not in SRST).

Something like this:

voice translation-rule 1

rule 1 /4711..../ /711..../

voice translation-profile indid

translate called 1

dial-peer voice 1000 pots

incoming called .

direct-inward-dialing

translation-profile in indid

HTH

Art

New Member

Re: Removing DID digits in SRST Mode

I have tried that but I'm getting an error

(cfg-translation-rule)#rule 1 /4711..../ /711..../
                                                       ^
% Invalid input detected at '^' marker.

Silver

Re: Removing DID digits in SRST Mode

Duh!

Sorry I'm rusty..

Try

rule 1 /4711\(....\)/  /711\1/

Art

New Member

Re: Removing DID digits in SRST Mode

Worked perfect, thanks

Silver

Re: Removing DID digits in SRST Mode

np - glad to hear it helped

Cheers!

Art

560
Views
5
Helpful
5
Replies
CreatePlease to create content