We have a customer want to convert their 4 digit extension to 7 digit extensions. Since I cannot do that online while the servers are in production we are planning to rebuild the PUBLISHER (First Node) on a new server OFFLINE for couple of weeks change all the numbers and replace the existing publisher.
I was checking the Cisco doc's looks like I have to reinstall all the subscribers too when I replace the PUB. Is that true? Is there any other way we can do this so I don't have to reinstall all the SUB's again.
CM version is 6.1.3
Single Cluster - One PUB and 5 Subscribers spread across different locations.
Thanks..What tool is that ? is it built in house ? obviously you cannot share it then?
I'm looking all the possibilities to do this ..our first option was to go with Export all phone detail ..modify the numbers ..delete the phones and Import all the phone details back..Changing 2000 extensions in one short I was little concerned and was looking for alternatives that is why we chose this option. If it is going to be pain to reintroduce a PUB server on the network we may have to look other options.
All forwarded numbers, for example if userA forwarded his phone to extensionB that now is changing how will you incorporate this?
Since you are converting the dial plan I assume you made sure that the new DNs on the phones will not create an overlap with other system DNs, i.e. Voicemail ports, MeetMe, Park, cti ports, etc, I would suggest changing those as well.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...