Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Replacement IOS 15.1 command

Is there a IOS 15.X command for the "isdn nsf-service sdn" command which exists in 12.4?

I have 15.1.2T, and it no longer appears as a valid command under interface serial commands

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Replacement IOS 15.1 command

nsf service is supported only for Primary 4ESS switch type

with user side emulation - isdn protocol-emulate user (default)

Make sure that you  have  isdn switch-type primary-4ess and

DON'T have  isdn protocol-emulate network CLI under D-chan/Serial

interface and you shd see following options....

isdn nsf-service sdn
isdn nsf-service  megacomm

3 REPLIES
Cisco Employee

Re: Replacement IOS 15.1 command

Hi,

The "isdn nsf-service sdn" command needs to be configured under the
Serial/D-channel interface and is only supported for primary 4ESS switch type.
AFAIK it is supported on IOS 15.1.X

Regards,

Tere.

Regards, Tere. If you find this post helpful, please rate! :)
Cisco Employee

Re: Replacement IOS 15.1 command

nsf service is supported only for Primary 4ESS switch type

with user side emulation - isdn protocol-emulate user (default)

Make sure that you  have  isdn switch-type primary-4ess and

DON'T have  isdn protocol-emulate network CLI under D-chan/Serial

interface and you shd see following options....

isdn nsf-service sdn
isdn nsf-service  megacomm

New Member

Re: Replacement IOS 15.1 command

Indeed, after setting the switch type, yes, the command is there now.  Thanks for all the replies

378
Views
0
Helpful
3
Replies