Replacing a faulty VG224 (some dead ports). We edit the mac-address and update it in CUCM but the ports don't register. We can change the mac back and re-install the original and it works. Why can't you edit the gateway mac and swap out the box?
To replace the VG224, you will want to ensure the new one has the same configuration as the old one. Copy the configuration to the startup config of the new VG224. Also want to install the same IOS version on the new one. You will also need to edit the VG224 gateway configuration in CallManager to get the new MAC address configured; otherwise CallManager will not be able to communicate with the gateway.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...