Report for a route pattern

[DOUG DAVIDSON]

Is there a way to get a report from CAR that would show the number of calls for a particular route pattern?

We have some route patterns that are routed to external IVRs. The call comes in on one of 5 PRI/T1 and then are routed out another port to the external IVRs.

The calls appear as Tandem calls when looking at calls for the month, but I would like to be able to pull a report for a particular route pattern or group of route patterns to see the total number of calls.

Thanks,

Doug

[Jaime Valencia]

no, CAR does not record on which route pattern the call was placed.

HTH

java

if this helps, please rate

[DOUG DAVIDSON]

Does it not record it on where the call was received from? If I can see the route pattern that received the call that would give me what I need.

[Jaime Valencia]

these are all the fields that are on the DB

Cisco CallManager 4.1(3) Call Detail Record Definition

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cdr_defs/4_x/cdr413.html

at most you could run a GW utilization report but that's an average report

HTH

java

if this helps, please rate

[DOUG DAVIDSON]

Are they the same fields for 6.1.2?