I have one user whose MWI will not go out even though I have forced resyncronization of MWI and Reset from user account. How can I do it from the Extension (This is an Avaya PBX with a Qsig integration into CUCM 7 and Unity Connection 7.02) Can I go to the lead VM number and press 1002 for MWI off (MWI on is 1001)
Are you sure its a MWI that has been set by Unity or CUCM? I know PABXs also have the capability to set MWIs regardless of whether there is a voicemail system or not. Easiest way would be to use your Avaya PABXs code to turn the MWI light off.
If thats not possibe, dial 1002 from the affected extension into CUCM.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...