Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reset or Restart phone

Hi, both of the call managers went down during power outage. The Call managers are up and running however, I cannot push any changes to the phone such as a name change, directory change, reset or restart a phone. The changes are shown on the webpage in call manager but not on the phones.Can any help please!!!!! thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Reset or Restart phone

I would try to stop and restart the call manager service on the subscriber then do the same thing to the publisher and see if that helps?

I had an issue and there was a known bug. When I made a change it did not really do anything until I did what I mentioned above.

3 REPLIES
Silver

Re: Reset or Restart phone

I would try to stop and restart the call manager service on the subscriber then do the same thing to the publisher and see if that helps?

I had an issue and there was a known bug. When I made a change it did not really do anything until I did what I mentioned above.

New Member

Re: Reset or Restart phone

Thanks, I will try it. Our Call Manager version is 5.1.2.3000-2. I am curious if you had the same version. Thanks for the help!!

Silver

Re: Reset or Restart phone

I believe it is the same version. There have been some known issues that require an upgrade to fix. Our issue was secondary dial tone. I had created a test number using 9 as the first number. when I deleted all remains of the dn it was still in the database somewhere and the only fix was to restart the cm service on the sub and pub.

113
Views
0
Helpful
3
Replies