Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Reset web page Admin username & p/w on CCM5.1

Hi,

Easy one: Can someone advise me how to change the username and password used to access Web Admin Page?

Cheers

Rich

3 REPLIES
Hall of Fame Super Red

Re: Reset web page Admin username & p/w on CCM5.1

Hi Rich,

Here is the method;

From cli;

set password

{admin | security}

The systems prompts you for the old and new passwords.

Note The password must contain at least six characters, and the system checks it for strength.

This command allows you to change the administrator and security passwords.

Command privilege level: 1

Allowed during upgrade: No

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_0_4/iptpappa.html#wpxref47110

The password recovery method is listed here;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_0_4/iptpch2.html

Hope this helps!

Rob

Cisco Employee

Re: Reset web page Admin username & p/w on CCM5.1

To change the web admin pwd in 5.1 and later, use the utils reset_ui_administrator_password command.

The set password command allows one to change the password to access the ipc-platform-cli.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_1_1/iptpappa.html#wp1012330

Regards.

New Member

Re: Reset web page Admin username & p/w on CCM5.1

there's another way to change the Web Admin Page Password.

After login to the web page with CCMadministrator,go to

UserManagement=>Application User

find the CCMadministrator account and then you can change the password of the account in the configuration page

155
Views
0
Helpful
3
Replies
CreatePlease to create content