Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restarting Cisco Call Manager 6.1.3.3000-1

when i reboot the call manager, the service manager takes about 50 minutes to start.

I think this is not normal, What could be the problem?

Thanks

5 REPLIES

Restarting Cisco Call Manager 6.1.3.3000-1

It could be file system issues on the HDs. Can you post sh hardware here?

New Member

Restarting Cisco Call Manager 6.1.3.3000-1

Cisco Employee

Re: Restarting Cisco Call Manager 6.1.3.3000-1

Hi Juan,

You need to set up console access into the server to see if there are any errors. Check the CPU and memory usage after the system boots up. Did the server experience any improper shutdown ? - It may corrupt the filesystem. Get the output of "utils core list" to see if there are any core dumps. If nothing obvious comes up using the above steps then i would suggest downloading the recovery iso for cucm 6.1.X from cisco.com and booting the callmanager using that disk to run a file system repair.

HTH

Manish

New Member

Restarting Cisco Call Manager 6.1.3.3000-1

Thanks for your help Manish

But, Do you know can i monitoring CPU and Memory usage when the System Boots up?

Thanks!!!

Cisco Employee

Re: Restarting Cisco Call Manager 6.1.3.3000-1

Hi Juan,

No, its not possible, please verify the rest of the things as suggested above and let us know how it goes.

Manish

211
Views
0
Helpful
5
Replies