Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restarting CTI Service Manager

Does Restarting CTI Service Manager for a restart of all the phones connecting to Call Manager?

Sent from Cisco Technical Support iPad App

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Restarting CTI Service Manager

No John, it is not for restarting phones connected to CUCM. If you restart the CTI manager service, it ends/restarts the CTI connection to applications such as UCCX, UCCE etc. However, any CTI clients associated with that phone e.g. softphone, CAD etc will go offline till the service comes back online.

If you wish to restart all the phones, then you will have to manually select them all & click restart from CUCM admin page. Restarting Cisco Callmanager service can initiate phone unregistration & then phone starts looking for secondary call controller ( CUCM or SRST Router ) but it doesnt result in to phone restart.

HTH

GP.

Pls rate helpful posts by clicking on stars below the post !!

4 REPLIES
Cisco Employee

Re: Restarting CTI Service Manager

No John, it is not for restarting phones connected to CUCM. If you restart the CTI manager service, it ends/restarts the CTI connection to applications such as UCCX, UCCE etc. However, any CTI clients associated with that phone e.g. softphone, CAD etc will go offline till the service comes back online.

If you wish to restart all the phones, then you will have to manually select them all & click restart from CUCM admin page. Restarting Cisco Callmanager service can initiate phone unregistration & then phone starts looking for secondary call controller ( CUCM or SRST Router ) but it doesnt result in to phone restart.

HTH

GP.

Pls rate helpful posts by clicking on stars below the post !!

New Member

Re: Restarting CTI Service Manager

Thanks for your prompt reply. I did not want to force the phones to restart.

John

Sent from Cisco Technical Support iPad App

New Member

hello,

hello,

What logs can I activate in CUCM to see why I had to restart the CTI Manager.  This is for a client who uses CUAC and they wanted to know for the next time why we restart the CTI Manager and what causes the service to go down.

Thanks

J

Cisco Employee

Well that depends on the kind

Well that depends on the kind of issue you are facing there. Ideally, CM and CTI logs should be good to start with.

https://supportforums.cisco.com/document/126941/cucm-trace-lookup-different-scenarios

Regards

Deepak

2274
Views
5
Helpful
4
Replies