Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restric calls to International base on Calling number.

I have the network as follow

PSTN, International--Cisco AS5300--gk--CCM (4.1(3)SR3C)--IP Telephony (IP Phone, ATA...).

So I want a specific DN under CCM controlled NOT BE able to call outside PSTN or International. Pls help me!!!

1 REPLY

Re: Restric calls to International base on Calling number.

This is really easy, you have two options:

1.- Since the Route Pattern that is used to dial International calls has a Partition you

can remove this partition from the CSS of the phones that you want to block from dialing

International Calls.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/index.htm

2.- You can use a FAC (Forced Authorization Code), with this feature after dialing the

International number you will need to dial a code and then press # to route the call

otherwise it will never go out.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmfeat/fsfaccmc.htm#wp15243

The same principle applies for PSTN numbers.

HTH

//Jorge

113
Views
5
Helpful
1
Replies
CreatePlease login to create content