Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Restrict access to Configuration screen on phone w/ CME

How do I restrict access to the configuration screens under services under CME 12.4.(4)XC4

1 REPLY
Hall of Fame Super Red

Re: Restrict access to Configuration screen on phone w/ CME

Hi Matthew,

Can you try this via the ephone template method listed below.The example shows how to disable the settings Access enable/disable;

settingsAccess {0 | 1 | 2}

Enables and disables the Settings button on an IP phone (Default is Enabled).

0 - Disabled.

1 - Enabled (default). Phone user can modify features by using the Settings menu.

2 - Restricted. Phone user is allowed to access User Preferences and volume settings only.

Can you try ?

-----------------------------------------------------

Router(config-ephone-template)# service phone settingsAccess 0

-----------------------------------------------------

Router(config-ephone-template)# exit

Router(config)# ephone 15

Router(config-ephone)# ephone-template 8

Router(config-ephone)# exit

Router(config)# telephony-service

Router(config-telephony)# create cnf-files

Router(config-telephony)# exit

Router(config)# ephone 15

Router(config-ephone)# reset

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a008061137f.html#wp1123331

Hope this helps!

Rob

165
Views
0
Helpful
1
Replies
CreatePlease to create content