Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restrict CallForward destination on forwarded call

Hi all,

We're deploying a CUCM6.1. Customer has a question with regards to CFwdAll.

Let's say that Phone B has set CFwdAll to his personal Mobile phone MB! If phone A calls phone B, it should be forwarded to the mobile phone MB but phone A should not see the number of phone MB. I've tried to configure a translation pattern and restricted about everything that could be restricted but no luck. Any ideas?

2 REPLIES
New Member

Re: Restrict CallForward destination on forwarded call

This should tell you.

Connected Number Display

When a call routes through a translation or route pattern, routes to a Call Forward All or Call Forward Busy destination, or gets redirected through a call transfer or CTI application, the connected number display updates to show the modified number or redirected number.

To turn off phone display updates, so the phone displays only the dialed digits, set the Cisco CallManager service parameter "Always Display Original Dialed Number" to true. When this service parameter specifies true, the originating phone displays only the dialed digits for the duration of the call.

I found it on this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fshosp.html

HTH,

Randall

New Member

Re: Restrict CallForward destination on forwarded call

Hi there Randall,

Great answer!!

Thanks,

Lieven

127
Views
5
Helpful
2
Replies