Restrict number of B Channels on MGCP ISDN interface

[Gordon Ross]

I have an MGCP gateway on CUCM 7.1

How can I restrict the number of B Channels CUCM uses ? CUCM Wants to use all 30 channels. I only want it to make a maximum of 10 simultaneous calls out the ISDN-30. (I don't want to use the other 20-channels for anything else...)

Thanks,

GTG

[j.huizinga]

As far as I know, this is not possible with MGCP.

H323 can do that

JH

[Steven Holl]

Nah, you can do it:

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K14305072

It's just not supported by TAC/development, and you have to disable MGCP config server (no ccm config).