Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restricting call forward all to 4 digits Cisco CME.

I need to prevent users from forwarding their phones CFA to external 10 digit numbers. The forwarding needs to be limited to 4 digit internal numbers. I am using Cisco Communications Manager Express.

Can this be done with COR? Is it even possible?

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Restricting call forward all to 4 digits Cisco CME.

Under ephone-dn or template

call-forward max-length

Please remember to rate useful posts with the scrollbox below.

3 REPLIES
Hall of Fame Super Gold

Re: Restricting call forward all to 4 digits Cisco CME.

Under ephone-dn or template

call-forward max-length

Please remember to rate useful posts with the scrollbox below.

New Member

Re: Restricting call forward all to 4 digits Cisco CME.

Is there a way to apply this globally or does it have to be applied at the ephone level?

Thanks for the help.

Hall of Fame Super Gold

Re: Restricting call forward all to 4 digits Cisco CME.

It goes on ephone-dn or ephone-dn-template, so if as good practice recommends you are using dn-templates, you can apply it easily it to entire groups.

As you will invariably have the request that certain users are not limited.

139
Views
10
Helpful
3
Replies
CreatePlease to create content