Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Restricting Call Number from CUCME to CUCM7

Hello,

Im currently having an issue that dont understand. Im restricting calling id in CUCME lines and it works when calling to another CUCMEs and legacy PBX.

If i make the same call to my CUCM7 (via gatekeeper), the line number appears!

Is there any setting to change this behaviour?

thanks

met.

5 REPLIES
New Member

Re: Restricting Call Number from CUCME to CUCM7

Hey,

In the route pattern you should be able to set your Calling Line ID Presentation and Calling Name Presentation to restricted.

TONY

New Member

Re: Restricting Call Number from CUCME to CUCM7

Yes i see, but i want it to respect the CUCME configuration from the caller that calls to the CUCM7 user. (users in CUCME that are restriced appear restricted, those who dont want to restrict their number shows up on CUCM7 phone)

Wich option respects the CUCME configuration?

thanks

met.

New Member

Re: Restricting Call Number from CUCME to CUCM7

Can't anyone help with this issue:

In CUCME i set on the ephone-dn:

-> caller-id block

When this phone calls to CUCM7 via intercluster trunk (GK controllerd), the called-id appears in the ip phone registered in CUCM7!

Thanks,

met.

Hall of Fame Super Gold

Re: Restricting Call Number from CUCME to CUCM7

You may have to contact the TAC as it appears that teh VOIP connection is not honoring your clid restriction.

You could try applying a translation rule also but that would be just a partial work-around.

New Member

Re: Restricting Call Number from CUCME to CUCM7

Yes it seems that's the best option.

I'll give feedback later in case someone experiences the same problem.

tnx

met.

135
Views
0
Helpful
5
Replies
CreatePlease to create content