Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restricting calls based on Caller ID

I wanted to restrict inbound calls in CCM 5.1 from a specific caller ID (recieved via PSTN), my setup has MGCP gateways with centralised dial plan

any way this can be achieved in on CCM o GWs, i went through certain posts on Internet but no help, looks like this can be done on H.323 Gws but in CCM or MGCP Gws

4 REPLIES
Hall of Fame Super Silver

Re: Restricting calls based on Caller ID

CM does not natively allow for this, there are several options:

1.use H323 protocol and use reject rules on GWs

2. Use IPCC or Unity which allow for screening calls based on ANI, the downside is that all calls would need to be routed through these apps and port liceses may be an issue.

HTH,

Chris

Cisco Employee

Re: Restricting calls based on Caller ID

New Member

Re: Restricting calls based on Caller ID

HI

thanks for the response but its seems i cannot access this link withmy level of access, can you please send me this pdf or copy paste how to program this

thanks

Cisco Employee

Re: Restricting calls based on Caller ID

just remove partner/ from the link

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
212
Views
0
Helpful
4
Replies