Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

retain + on phone display for called number on h323 gw

hi,

I just wondering if anyone run into this issue and has any suggestions.

basically its a cucm with h323 gateway. when someone dials a local/long distance, i take that and globalize it to add +1. so it will show up on the phone display as +1 followed by local /long distnace #. (ex.+14162221111)

the problem is that, ,the call manager is doing it correctly however as soon as it reaches the 323 gateway, i have a dialpeer that takes the sent called number with 9 followed by local /long distance # strips the 9 and sends it out of PRI.. as soon as it strips the 9, teh phone display of hte called number changes from +14162221111 to 4162221111.

how do we make sure that called # on the display remains +1 but gateway while gateway strips the 9.

thanks

vijay

3 REPLIES

retain + on phone display for called number on h323 gw

It should work if you set the service parameter "Always Display Original Dialed Number" to true

Re: retain + on phone display for called number on h323 gw

nope that will retain the actual dialed number 9 followed by 10 digits

Sent from Cisco Technical Support iPhone App

Re: retain + on phone display for called number on h323 gw

Oh I missed that you were globalizing. I thought that the users were dialing with +1

153
Views
0
Helpful
3
Replies