Existing 7.1.2 cluster, wishing to add a retired CM4 server, for the purpose of serving as a dedicated tftp server. Is the upgrade path the same as if it were a new cluster? or does it change b/c its joining an existing cluster?
If by upgrade path you mean ordering an upgrade kit and getting licenses, etc. Then yeah, more or less.
If by upgrade path you mean you would use DMA, then no. You will want to check the hardware (cpu/ram/hdd) to make sure it lines up with (a) supported hardware and (b) your existing cluster capacity/server models. For example, don't stick a mcs 7825 into a cluster of mcs 7845 servers hosting 10,000 users. That is asking for trouble.
All you really need (once you validate the hardware) is a valid node license (the upgrade kit will get you this) and the software install media (upgrade kit or existing is fine). You will then add the server as a new cluster subscriber. Basically it is a new install of server into an existing system, not an upgrade.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...