Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

revision number

Cisco 2801 (revision 7.0) with 234496K/27648K bytes of memory.

Processor board ID FHK1143F2WC

2 FastEthernet interfaces

1 terminal line

1 Channelized (E1 or T1)/PRI port

2 Voice FXS interfaces

2 Voice E & M interfaces

3 DSPs, 48 Voice resources

1 cisco service engine(s)

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

What does revision 7.0 means? I have seen revision 6.0 etc. Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: revision number

These are hardware-level revision number for the motherboard, and do not influence the operations at all, that is, any revision number is supposed to work fine as another.

Hope this helps, please rate post if it does!

3 REPLIES
Hall of Fame Super Gold

Re: revision number

These are hardware-level revision number for the motherboard, and do not influence the operations at all, that is, any revision number is supposed to work fine as another.

Hope this helps, please rate post if it does!

Community Member

Re: revision number

Thank you! So can I say, the higher revision is better?

Hall of Fame Super Gold

Re: revision number

No, there are no better revisions, all work the same and make no difference to the user.

Thanks for the nice rating and good luck!

117
Views
0
Helpful
3
Replies
CreatePlease to create content