I need some light to continue troubleshooting a Ring Back tone issue. The problem is that it is only happening when someone calls to the USA DID number from an USA line. ( I tested from an Argentina trunk and Germany trunk and there is RBT)
I have a CUCME wich is also an H323 gateway.
This is the topology more or less:
[USA DID Provider] ---SIP Trunk---[SBC]---GK/H323----[CME]----IP Phones
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...