I have a customer that is using voip between sites, currently they have traditional pbx conected to 2800 routers via isdn with qsig with hdlc encapsulation. They have a gatekeeper in the main office and 15 branches.
Now I put an cucm6 in a new branch off. and create an h225 trunk gatekeeper controlled between the cucm and the gatekeeper. One of the issues still Im working is the ring back tone. When the users in the main office (@ gatekeeper side) with traditional phones dial to ip phones (@ branch), they don't hear the ring back tone. I change some h225 ent. parameter without success..
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...