On 7941 and 7961, when you go into settings - user preferences - rings, the default ring has a long list of different tones with meaningful names next to them. However, for each of the lines, you get a much smaller list and names from ring 1 to ring 7. How do I get the lines to have the same list of ring tones as the default ring does? This is VERY confusing to the users when they like several ring tones and then want to assign them to different lines.
By default the ringtype option has 25 default ring and 7 line ring type options, but as you know you can edit the ring files, the one for the default rings is the RingList.xml and the one for the Line is the DistinctiveRingList.xml both files are in C:\Program Files\Cisco\TFTPPath make sure that you have the ring tone that you want for the line in the DistictiveRingList.xml file, then restart the TFTP service.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...