Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

RingBack Tone CCM 6

Hi friends,

I want to check sthg with u!!

In fact i was wondering if with CCM6 and there is the possibility to change the ringback tone of the second incoming Call.

Here it is my explanation:

Suppose that we have 3 IP Phones A,B and C.

B calls A and they'r now in communication.

Suppose now that C calls A too, normally C will hear the normal ringback tone (We suppose that A can handle more than One Call) But C won't know if A is in communication or no !!!!!

i was wondering if there is a way to change the ringback tone to C to make him know that A is in communication !!!????

Plz it's really urgent !!!

Can somebody help help me ??

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RingBack Tone CCM 6

unfortunately that is not possible, there are no different ringback tones depending on the call state, you will get the same ringback tone no matter what the status of the other phone is (as long as it's not busy of course)

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: RingBack Tone CCM 6

unfortunately that is not possible, there are no different ringback tones depending on the call state, you will get the same ringback tone no matter what the status of the other phone is (as long as it's not busy of course)

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: RingBack Tone CCM 6

Thx a lot

211
Views
0
Helpful
2
Replies
CreatePlease to create content