Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ringing on Un-assigned Button - Cisco 9971 Issue

Hi There,

We have a scenario like , The call is hitting in Primary line for 5 rings and its jumping into second button of the phone which is not having any number configured and it is continuing for 4 more rings, May i know what is the issue and how to resolve.                  

Everyone's tags (5)
3 REPLIES
Cisco Employee

Ringing on Un-assigned Button - Cisco 9971 Issue

It sounds like the call is showing on the second session key (right side button rather than left) after first appearing on the first session key.  The phone console logs which can be collected from putting the phone's IP address into a browser when you have "Web Access" set to enabled in CUCM will help identify why the phone is presenting the call this way.

New Member

Ringing on Un-assigned Button - Cisco 9971 Issue

HI Joe,

Thanks for your reply, But IN Console file there is a lot of messages which we need to spend more time i bilieve, But we have a ticket to solve the issue ASAP, Any clue what is the step for resolution.

Hall of Fame Super Silver

Re: Ringing on Un-assigned Button - Cisco 9971 Issue

As Joe pointed out (+5 for Joe) this is working as designed as the buttons on the right are session buttons not lines. If you do not want to allow call waiting then in CUCM change the "busy trigger" parameter to 1 and second call will end up in forward busy destination, i.e. voicemail.

As to errors in console you will always see some for example CTL not found, etc those are expected if you do not have encryption on.

HTH,

Chris

300
Views
10
Helpful
3
Replies