Ok, I am very new to CME, we just converted over last night. Over all things went well, but I have a VERY strange issue. I have a user that while she is on a call, hears ringing on the line. Not actually her phone ringing, but the ring you would expect to hear after dialing an out side number. She has a 7940 with a 7914 side car and it doesnt seem to matter what line she is on. Both sides of the call can hear the ringing, but it will ring for ever so I dont think its actually dialing a number, just ringing... Any ideas?
Exactly, both sides can hear the ring back after the call is active and both parties are on the line. All the lines are on a PRI so no analog lines, and no special features running on the PRI. The T1 is comming on a vWIC... So far, it seems like only calls from out of state are having the issue. And only this one user...
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...