Cisco Unified IP Phones have two default ring types: Chirp1 and Chirp2. Cisco Unified CME also supports custom ring tones using pulse code modulation (PCM) files. An XML file called RingList.xml specifies the ring tone options available for the default ring on an IP phone registered to Cisco Unified CME. An XML file called DistinctiveRingList.xml specifies the ring tones available on each individual line appearance on an IP phone registered to Cisco Unified CME.
1. Create a PCM file for each custom ring tone.
2. Edit the RingList.xml and DistinctiveRingList.xml files using an ASCII editor.
3. Copy the PCM and XML files to system Flash on the Cisco Unified CME router.
4. Use the tftp-server command to enable access to the files.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...